HylaFAX The world's
most advanced open source fax server
Re: Failed job also
> > > > Oct 13 10:18:31.93: [ 4019]: --> [7:CONNECT]
> > > > Oct 13 10:18:31.93: [ 4019]: SEND begin page
> > > > Oct 13 10:18:40.58: [ 4019]: SENT 9287 bytes of data
> > > > Oct 13 10:18:40.58: [ 4019]: SEND 2D RTC
> > > > Oct 13 10:18:40.58: [ 4019]: SEND end page
> > > > Oct 13 10:18:40.58: [ 4019]: SEND send MPS (more pages, same document)
> > > > Oct 13 10:18:59.75: [ 4019]: --> [5:ERROR]
> > Can you repeat this with a more complex page, so that we can see whether
> > your apparent overrun is being absorbed by buffering or whether you really
> > don't have effective flow control.
> It sent the same exact page (10 pages actually) fine to another
In that case the problem is almost certainly with the modems not the software
> machine. Granted, its a /etc/ttys.conf file. Can you suggest something
> else to send?
Actually your transmit rate is reasonable. I had just answered another
one which had too short a transmission time and misread 31.93 as 39.93;
however, note that you don't have adequate tracing to allow one to reliably
detect an overrun case.
The best case would probably be a scanned newspaper. Your 9287 really is
rather small for a fax page. The 10 pages don't matter for overruns as the
clock is restarted for each page.