HylaFAX The world's
most advanced open source fax server
Re: is there a faxdelmodem proceedure?
You might just need to manually remove the stray files in /var/spool/fax/status
I suggest keeping your config.cul* files since their existance itself is
not causing the extra faxstat info.
> I have a HylaFAX server setup with faxgetting running from the inittab
> against four modem. We had to temporarily remove two modems so I turned
> off the faxgetty that was running against those two devices but when
> I run faxstat it still shows the modems as running & idle. If I send
> a fax out it does get sent out via the two remaining modems but I am
> wondering about the spurious output from faxstat. Should I also
> move/remove the FIFO.cul* and config.cul* files for the two modems
> thus neccesitating running faxaddmodem when I put the hardware back
> on the system or is there a better method to temporarily turn off
> an available modem?
> Steve DuChene email@example.com
Mark G. Thomas (Mark@Misty.com -- http://www.misty.com/)