HylaFAX The world's
most advanced open source fax server
Re: Zoom modems
My OS is Mandrake 6.0
and my config.fax file looks like:
# $Id: rc32acl-1,v 1.18 1996/06/24 02:58:39 sam Rel $
# HylaFAX Facsimile Software
# Configuration for a Rockwell-based Class 1 modem.
# SupraFAX v.32bis firmware V1.200-C or newer
# (and others)
# This configuration file sets up the modem to run at 38.4
# and use RTS/CTS flow control by default.
FAXNumber: "+351 21 ???????"
GettyArgs: "-h %l %s"
TagLineFormat: "From %%l|%c|Page %%p of %%t"
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
ModemType: Class1 # use class 1 interface
ModemFlowControl: rtscts # default
ModemNoFlowCmd: AT&K # disable flow control cmd
ModemHardFlowCmd: AT&K3 # hardware flow control cmd
ModemSoftFlowCmd: AT&K4 # software flow control cmd
ModemSetupDTRCmd: AT&D3 # setup so DTR drop resets modem
ModemSetupDCDCmd: AT&C1 # setup so DCD reflects carrier (or not)
ModemSetupAACmd: AT+FAA=0 # in case modem supports Class 2 also
ModemMfrQueryCmd: !Rockwell # no way to query modem
ModemModelQueryCmd: !RC32ACL # not always right
I'd definetly would appreciate some help...
I allways get a problem in the faxaddmodem script
stty: standard in: unable to perform all request operations
I have the latest sh-utils available!
May you help me out???
On Fri, 7 Jan 2000, Nico Kadel-Garcia wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> On Fri, 7 Jan 2000, Jose Pedro Pereira wrote:
> > I have a 14.4 Ext Zoom modem and I cant get it to work with Hylafax...
> > It dials out correctly, but then it does nothing when the remote
> Zoom = Rockwell chipset. Definitely use the Rockwell configurations.
> > answers... In the logs, there is a message saying Unknown problem,
> > please check modem power... But if it wasnt connected, it wouldnt dial,
> > would it??? May you help me out with this...
> Zoom sucks and has sucked for a long bloody time.
> > I only had problems setting things up in the faxaddmodem script... It
> > says something about stty:standard input: unable to perform all
> > requested operations a few times, but it detects the modem well...
> > I would appreciate an answer, cause this is killing me...
> > Many thanx in advance
> What version of HylaFAX, what operating system, and what does your
> $SPOOLDIR/etc/config.* file look like?
> Nico Kadel-Garcia
> Senior Engineer, CIRL
> Mass. Eye and Ear Infirmary
> -----BEGIN PGP SIGNATURE-----
> Version: 2.6.2
> -----END PGP SIGNATURE-----