HylaFAX The world's
most advanced open source fax server
Re: FIFO: PROBLEM SOLVED
At first, I want to mention that the problem is solved ...
Once again (the 5th or 6th time), I tried to start the Hylafax processes
# /etc/init.d/hylafax stop
Stopping HylaFAX Servers.
# /etc/init.d/hylafax start
HylaFAX: faxq hfaxd (w/ compatibility & SNPP).
# ps -aef | grep "fax"
uucp 9858 1 0 18:02:28 ? 0:00 /usr/local/HylaFAX-v4.0/sbin/faxq
uucp 9860 1 0 18:02:28 ? 0:00 /usr/local/HylaFAX-v4.0/slib/hfaxd -i
hylafax -o 4557 -s 444
showed that the "faxq" is running.
# sbin/faxmodem tty1A
does not show any error!
I didnot configure anything else. Can anyone explain this strange
behaviour of the "faxq" process?
and then: THANKS TO ALL YOU TRIED TO HELP ME OUT OF THIS SITUATION !!!
I have to stop now, there are about 100 faxes to send ... just want to
check if everything is going on fine.
snail: ANZER GmbH - Pieperstr. 14 - 32791 Lage - Germany
voice: (0049) 5232 / 9777-21
fax: (0049) 5232 / 78094