HylaFAX The world's
most advanced open source fax server
Re: Any idea what this error is?
So that's a real no answer, not a "I answered the phone but didn't get what
I liked back".
(The real question is, did I pay for that call. If the line wasn't answered,
the answer to the question is no ;-)
The reason this becomes important is that I am attempting to flag error
conditions and prevent calling a "bad" machine again and again in a
fruitless attempt to deliver subsequent messages. This is an automated
system and sends a LOT of faxes so being diagnostic about *why* something
didn't work is important.
Karl Denninger (firstname.lastname@example.org) Web: http://childrens-justice.org
Isn't it time we started putting KIDS first? See the above URL for
a plan to do exactly that!
On Wed, Feb 02, 2000 at 09:52:42PM +0000, Mark Wilson (P. Kay Associates Ltd.) wrote:
> Like it says, No Answer after several attempts. Often happens when
> destination fax out of paper.
> Best Regards,
> Mark Wilson
> P. Kay Associates Ltd.
> On Wed, 2 Feb 2000, Karl Denninger wrote:
> > Any idea what this particular error means?
> > --
> > --
> > Karl Denninger (email@example.com) Web: http://childrens-justice.org
> > Isn't it time we started putting KIDS first? See the above URL for
> > a plan to do exactly that!
> > Date: Wed, 2 Feb 2000 08:40:28 -0600 (CST)
> > From: Facsimile Agent <fax>
> > To: firstname.lastname@example.org
> > Subject: facsimile job 1676 to xxx-xxx-xxxx failed
> > Your facsimile job to xxx-xxx-xxxx failed because:
> > No answer (T.30 T1 timeout); too many attempts to dial
> > ---- Transcript of session follows ----
> > Feb 02 08:38:43.68: : SESSION BEGIN 00002611 xxxxxxxxxx
> > Feb 02 08:38:43.68: : SEND FAX: JOB 1676 DEST xxx-xxx-xxxx COMMID 00002611
> > Feb 02 08:38:43.68: : DELAY 2600 ms
> > Feb 02 08:38:49.82: : DIAL ..............................
> > Feb 02 08:40:26.98: : REMOTE HANGUP: No answer (T.30 T1 timeout) (code 11)
> > Feb 02 08:40:26.98: : SEND FAILED: No answer (T.30 T1 timeout)
> > Feb 02 08:40:26.98: : SEND FAILED: No answer (T.30 T1 timeout); too many attempts to dial
> > Feb 02 08:40:28.12: : SESSION END
> > ---- Unsent job status ----
> > Destination: xxx-xxx-xxxx
> > JobID: 1676
> > GroupID: 1676
> > Sender: karl
> > Mailaddr: email@example.com
> > CommID: 00002611
> > Modem: outbound
> > Submitted From: localhost.Denninger.Net
> > Page Width: 215 (mm)
> > Page Length: 279 (mm)
> > Resolution: 98 (lpi)
> > Status: No answer (T.30 T1 timeout); too many attempts to dial
> > Dialogs: 0 (exchanges with remote device)
> > Dials: 5 (consecutive failed calls to destination)
> > Calls: 5 (total phone calls placed)
> > Pages: 0 (pages transmitted)
> > TotPages: 4 (total pages to transmit)
> > Attempts: 0 (attempts to send current page)
> > Dirnum: 0 (directory of next page to send)
> > ---- Documents submitted for transmission ----
> > The following documents were submitted for transmission and are
> > available on the server for reuse until they are automatically
> > purged when this job is removed. Documents may also be manually
> > removed using the faxrm command; consult faxrm(1) for information.
> > Filename Size Type
> > docq/doc3270.ps 52371 PostScript
> > docq/doc3271.ps 6223 PostScript
> > docq/doc3272.ps 8450 PostScript
> > ----- End forwarded message -----