HylaFAX The world's
most advanced open source fax server
Re: modem appears wedged
I only had this problem when I changed modems (was using one modem, and
then put in another) without doing any faxsetup or faxaddmodem work. I
ended up uninstalling the RPM and then reinstalling it... which worked.
The firmware *was* different on the modems, although the make and speed
were the same. You may want to look into the HylaFAX AT settings for your
I will say this, though... there has been no end to the debate on this list
about the usefulness of USR/3Com modems with HylaFAX.
At 08:58 AM 6/1/00 -0400, jim neff wrote:
>I am having some difficulty in installing Hylafax.
>I am using Hylafax 4.0pl2, on a Pentium 133 running Red Hat6.1, with a
>single USR 56K Faxmodem
>After about 5 minutes I will get mail in my root account that says something
>to the effect that Hylafax thinks that there is a problem with the device
>/dev/ttyS0. The device appears wedged.