HylaFAX The world's
most advanced open source fax server
[hylafax-users] Re: faxrcvd proplem
Just so you know. I had the same problem a few weeks ago (check the archive
e-mail list on this) .. Noone could figure it out, and I never solved the
Even better, if you faxrcvd from the command line (by putting ttys) and the fax
file as parameters) the fax WILL print! It is just that when hylafax calls it,
it wont print :(
If you figure it out, let me know!
--- Allen Bolderoff <email@example.com> wrote:
> I am running the
> latest Mandrake 7.1 Linux release, with hylafax 4.0pl2.rjc11 ( that is the
> package name)
> I have got it set up, and working to the point that I can send and receive
> faxes with no problem.
> when receiving faxes the bin/faxrcvd program runs, and emails messages etc
> etc. - It is set up to also print the faxes, however it does not. Now, before
> we say the script is wrong, lets look at what is happening.
> I have added the uucp user to the lp grooup.
> If I su - uucp, then go to the /var/spool/fax dir, and execute
> bin/faxrcvd "recvq/fax00016.tif" "ttyS1" "00000122" ""
> (which is what log/c00000122 shows as the command that was run)
> the fax in question prints fine. HOWEVER, when this faxrcvd program is run by
> hylafax upon receipt of fax, it runs the faxrcvd script, sends the emails,
> does not print.
> anyone have any ideas on this?
> Allen Bolderoff <firstname.lastname@example.org>
> LNC - Linux, help and commentary http://linux.netnerve.com
> CTPC - Caffeine - get it here: http://www.coffee-tea-pots-cups.com/
> GPG fingerprint = CBB0 8626 702C 3D01 B5AD A54A DC2C 93B7 3E4B 6472
> ____________________ HylaFAX(tm) Users Mailing List _______________________
> To unsub: mail -s unsubscribe email@example.com < /dev/null
Do You Yahoo!?
Get Yahoo! Mail - Free email you can access from anywhere!
____________________ HylaFAX(tm) Users Mailing List _______________________
To unsub: mail -s unsubscribe firstname.lastname@example.org < /dev/null