HylaFAX The world's
most advanced open source fax server
Re: [hylafax-users] Hayes Accura 56K Modems -Resend
Andrew McRory <firstname.lastname@example.org> writes:
> > I am writing once again to enquire if there anyone who has used a Hayes
> > Accura 56K with HylaFAX and has had any issues with them. I am happily
> Maybe this config file will help? It is for the internal hayes acura 56
> (4704US) that is currentl;y shipped by Zoom.... works for us flawlessly
> === start ===============================================================
> # $Id: hzacura-56i v0.01
> # Feb 17 23:16:33 faxgate FaxGetty: MODEM ZOOM V.90 ISA I052099V -A Z207
> # Zoom/Hayes Acura 56K V.90 Internal ISA Modem
> # CONFIG: CLASS2: Zoom?V?90?ISA?I052099gV??A?Z207*-RTSCTS
> # CONFIG: CLASS2: Zoom?V?90?ISA?I052099gV??A?Z207*-DEFAULT
> # BEGIN-SERVER
> # END-SERVER
> # Modem-related stuff: should reflect modem command interface
> # and hardware connection/cabling (e.g. flow control).
> ModemType: Class2 # use this to supply a hint
> ModemRate: 115200 # max rate for DCE-DTE communication
Might be too fast for fax mode. I tend to use 19200 for all modems.
> ModemFlowControl: rtscts # XON/XOFF flow control assumed
Very doubtful that it works flawlessly. For most modems
ModemFlowControl=rtscts is not enough to activate hardware flow
control. You should also specify an appropriate
ModemHardFlowCmd/Class2HFLOCmd (consult your modem manual). Or you may
choose software (xonxoff) flow control.
> ModemRecvFillOrder: MSB2LSB # bit order of received facsimile
> ModemSetupAACmd: AT+FAA=1 # enable in current class
Are you really using adaptive amswer feature? If not, comment this line, it
will make incoming connections faster and more reliable.
> Class2RecvDataTrigger: "" # character sent to modem to start recv
> Class2XmitWaitForXON: yes # if true, wait for XON before send
Useless lines (these are default values); can be ommited.
> === end =================================================================
Hope to hear from you soon,
____________________ HylaFAX(tm) Users Mailing List _______________________
To unsub: mail -s unsubscribe email@example.com < /dev/null