HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Waiting for Modem to come ready

On Mon, Mar 12, 2001 at 09:11:02AM +1000, Ken Cole wrote:
> It is plugged into an add-in PCI I/O card, in a Compaq Prosignia 200, which I
> configured using setserial and data from /proc/pci as follows:
> The command seems to work and a setserial /dev/ttyS1 -a
> shows:
> /dev/ttyS1, Line 1, UART: 16550A, Port: 0x5450, IRQ: 3
>         Baud_base: 115200, close_delay: 50, divisor: 0
>         closing_wait: 3000, closing_wait2: infinte
>         Flags: spd_normal skip_test
> I can connect to the modem using cu -l /dev/ttyS1 -s 38400

Just yesterday, someone said they were havving problems with a PCI
serial (I think) card, which went away when they hung the modem on an
onboard, traditional serial port.  Assuming that wasn't you (:-), try
that, and see if your problem goes away.

-- jra
Jay R. Ashworth                                                jra@baylink.com
Member of the Technical Staff     Baylink
The Suncoast Freenet         The Things I Think
Tampa Bay, Florida        http://baylink.pitas.com             +1 727 804 5015

____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null

Project hosted by iFAX Solutions