HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Hylafax and PABX

On Mon, 12 Mar 2001 08:06:02 -0500, you wrote:

>where there is a PABX.
>I got the message: no local dial tone.
Is your problem just X3 or you need to add a number to get the external
>I've tried to insert ATX3 into some fax/etc/cuaa1.config:
>ModemHardFlowCmd:	ATX3:	AT&K3		# hardware flow control cmdK3
>ModemSoftFlowCmd:	ATX3:	AT&K4		# software flow control cmdK4
>ModemSetupDTRCmd:	ATX3:	AT&D3		# DTR off causes modem to resetD3
>#ModemSetupDTRCmd:	AT&D2S25=1S38=0	# Dynalink 1414VE needs this
>ModemSetupDCDCmd:	ATX3:	AT&C1		# DCD follows carrierC1
>ModemSetupAACmd:	ATX3+FAA=1+FCLASS=0
>But it seems get not effect.
Actually the above lines could cause great confusion to HylaFAX. Undo
all your editing.

To add X3 try changing or adding
ModemResultCodesCmd:    ATQ0
ModemResultCodesCmd:    ATQ0X3
The above is what I'm using.

To add a number to get the external line you have 2 choices:
1) The "right" one: edit dialrules
2) The quick one: edit config.<devid>
ModemDialCmd:           ATDT%s
ModemDialCmd:           ATDT<your-number>,%s


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null

Project hosted by iFAX Solutions