HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] How 2D-MR work?

On Wed, 3 Apr 2002 19:49:11 +0100, procadas@creditus.pt wrote:

>-1 parameter the fax fails. The advice from Lee to include in destctrls
><number> supports2DEncoding=no don't fix the problem, but I can see in the
Does the above mean that:
1) the fax is sent 2d
2) the fax is sent 1d and it doesn not work

If 1), then check that:
- the canonical form of the number you use in destctrls is correct (must be
the same of info/<faxno>), 
- destctrl is enabled in etc/config
if all is fine, then try editing
info/<faxno> to contain

>found what's going on. Just one last question, where in the log we cann see
>wich enconding(1-D/2D) is used? Thanks.

Apr 03 19:51:01.65: [23459]: REMOTE best format 2-D MMR
Apr 03 19:51:01.65: [23459]: USE 2-D MR


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null

Project hosted by iFAX Solutions