HylaFAX The world's
most advanced open source fax server
Re: [hylafax-users] Fw: Fwd: 0 pages printing with whfc
On Wednesday 08 May 2002 18:21, you wrote:
> ----- Original Message -----
> From: "Lee Howard" <email@example.com>
> To: "Robert Davidson" <firstname.lastname@example.org>
> Cc: <email@example.com>
> Sent: Wednesday, May 08, 2002 11:31 AM
> Subject: Re: [hylafax-users] Fwd: 0 pages printing with whfc
> On 2002.05.08 04:18 Robert Davidson wrote:
> > May 07 06:50:05.59: [ 2980]: USE 20 ms/scanline
> > May 07 06:50:05.59: [ 2980]: <-- [5:ATH0\r]
> > May 07 06:50:05.82: [ 2980]: --> [2:OK]
> > May 07 06:50:05.82: [ 2980]: SESSION END
> This generally means that the image made it through ps2fax but when
> HylaFAX went to send it through it was incapable of faxing it. Other
> people have had this problem (usually with WHFC). You may want to check
> the archives. I'd bet if you faxed with sendfax it would work fine.
> ____________________ HylaFAX(tm) Users Mailing List _______________________
> To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
> On UNIX: mail -s unsubscribe firstname.lastname@example.org < /dev/null
You are absolutely right -
sendfax -d 2146531776 /var/spool/fax/doneq/q11
sent the job - 2:2 pages.
If only I could use sendfax with Win98 clients...
doc11.ps.6 appears as expected in gv.
After wading through a whole bunch of hylafax mailing list messages, I
restested with the Apple Laserwriter 16/600 and found I did not have
Postscript optimized for portability turned on with that printer.
Now it works beautifully with notepad and Word 2000, even with relatively
FWIW, HP and Adobe drivers did not work on my system even with optimize for
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe email@example.com < /dev/null