HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Problem with state "waiting for modem to come ready" after sending a fax

Sorry mailing lists, at this point I can say that I am not able to resolve
my problem.
I have spent many beautiful words for hylafax and now I must make it to work
at all costs.
You think I need the commercial support ?

----- Original Message -----
From: "Lee Howard" <faxguy@howardsilvan.com>
To: <nico@gruppoerrepi.it>
Sent: Tuesday, September 03, 2002 5:04 PM
Subject: Re: [hylafax-users] Fw: Fw: Problem with state "waiting for modem
to come ready" after sending a fax

> On 2002.09.02 08:43 nico@gruppoerrepi.it wrote:
> > 2) I have this problem only with RedHat 7.3. With RedHat 7.2 Hylafax
> > works
> > well, without any problem.
> > I say so because I have done a test:
> > I have firstly installed Redhat 7.2 and then Redhat 7.3 in 6 different
> > servers, then I have tried hylafax 4.1.3 RPM installation on every
> > server
> > with 7.2 and 7.3 (I have used the same modems US Robotics 56k Faxmodem
> > and
> > Rockwell generic).
> > The result was that hylafax works correctly in all the six redhat 7.2
> > installation and it provokes the malfunctioning in 5 redhat 7.3
> > installation. Only one redhat 7.3 installation works fine without
> > problems
> > (it is an IBM PC300GL).
> If you find that one out of six servers do not behave this way, then
> you should look into that one server to find out why.
>   Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*

Project hosted by iFAX Solutions