HylaFAX The world's
most advanced open source fax server
Re: [hylafax-users] how to set calling party number ?
Well, I turned faxsend into a script that modifies the "FAXNumber" line
in /var/spool/hylafax/etc/confix.ttyx0 per-call.
This sort of works, but the CID is apparently only transmitted within
T.30, not on the ISDN level.
So I can see it at the receiver's end in the fax header
but I can NOT see it as the originator of my H.323 call
(which is what I really want - for accounting purposes).
So I'm not there yet. Thanks anyway,
Joey Officer wrote:
> Although I'm not sure if this applies to specifically what you are working
> with, look in /var/spool/hylafax/etc/confix.ttyS2 (where ttyS2 is my modem,
> yours will vary) That is where the information is stored, I don't know if
> you could append that on the fly to contain the information you require.
> Hope that points you in the right direction...
> -----Original Message-----
> From: email@example.com
> [mailto:firstname.lastname@example.org]On Behalf Of Markus Storm
> Sent: Monday, November 04, 2002 4:43 AM
> To: email@example.com
> Subject: [hylafax-users] how to set calling party number ?
> Hi all,
> I am using Hylafax with a virtual modem (t38modem from OpenH323, to
> enable Fax over IP). Works great, in and out.
> I'm using it as a mail2fax gateway and would like to set the CLID
> (calling line identity a.k.a. sender's number) on outbound calls .
> faxmail and sendfax -f use the sender's address to put it
> onto the cover sheet only, but they don't set the CLID.
> Is there any (Class 1 fax modem) command to do that ?
> Any support for this from within Hylafax ?
> Markus Storm, mediaWays GmbH, Verl, Germany
> storm @ mediaways.net
> ____________________ HylaFAX(tm) Users Mailing List _______________________
> To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
> On UNIX: mail -s unsubscribe firstname.lastname@example.org < /dev/null
> *To learn about commercial HylaFAX(tm) support, mail email@example.com.*
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe firstname.lastname@example.org < /dev/null
*To learn about commercial HylaFAX(tm) support, mail email@example.com.*