HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Broadcast faxing problems with WHFC

> if I send with WHFC 1.0.9 I get a killtime of 1-47 hours (set with the
> slider), unless I set it at 48 hours and the server naks the request with a
> killtime expired

Did i understand you right, that a choice of 48 h results in an error?
It works with WHFC on my installation.

> Or if I set it at server then the killtime is set to 3 hours.. is it whfc or
> hylafax?

It is HylaFAX, but not the value specified in the 
sendfax.conf/hyla.conf. If you set it to server in WHFC the default is 
used, which is 3 h.

> How do I find out where to set this?
> Or in a pinch  how can I scan all the faxes in the sendq and add 3 days to
> the killtime setting?

Scan all the qxxx-files in the sendq for


and add 72*3600=?? to xxxxxxxxx.

(The time values are serial numbers according to date +%s)

You can also play with the "Send fax in" slider, as the killtime is 
calculated beginning from the time, where the fax should be sent.


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*

Project hosted by iFAX Solutions