HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Some users don't get all scan lines


The fact that the faxes are not ultimately going through at 14400 is a 
big indicator that there is a problem somewhere still.  At this point, 
if faxing to other fax machines is okay, and only faxing to this 
particular destination is a problem, then I would suspect some line 
condition of some sort to be the culprit.

If you can fax between the Brother and HP just fine and then unplug the 
same phone line from the Brother and plug it into the HylaFAX modem, 
and then have copy quality problems when faxing to the HP, I would 
suspect that the difference is that the Brother and HP both do ECM and 
all yet released HylaFAX versions do not.  ECM will usually correct 
most copy quality problems which surface due to line noise.  HylaFAX 
ECM support is still in development, although it may work just fine for 
you.  (Or it may crash your computer and make it melt ;-)


If you do implement ECM and then send a fax through and it goes through 
clearly, then show me *that* log, and I can probably tell you what the 
problem was.  Make sure you *read* the entire Bugzilla report before 
even thinking about using it.


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*

Project hosted by iFAX Solutions