HylaFAX The world's
most advanced open source fax server
Re: [hylafax-users] COMREC invalid response received (expected PPS)
Lee Howard wrote:
> I'd need to see your logging at a higher setting (to show the actual
Thank you for your response.
How can I change that? I have searched through the documentation and I
assume the SessionTracing parameter should be changed, what into what
value? Accually I haven't found the maximum value of that parameter.
> modem data) and try to parse through it to know for certain, but this is
> generally and indication that the sender's modulator, the receiver's
> modulator, or both are not in a usable state. Generally they "come out
> of it" after a couple of attempts, but in this case it did not happen.
> My bet is on the USR modem being the culprit here.
>>sie 12 14:42:44.62: [ 4277]: RECV recv CTC (continue to correct)
>>sie 12 14:42:44.62: [ 4277]: <-- [9:AT+FRS=7\r]
>>sie 12 14:42:44.78: [ 4277]: --> [2:OK]
>>sie 12 14:42:44.78: [ 4277]: <-- [9:AT+FTH=3\r]
>>sie 12 14:42:44.90: [ 4277]: --> [7:CONNECT]
>>sie 12 14:42:46.11: [ 4277]: --> [2:OK]
>>sie 12 14:42:46.11: [ 4277]: RECV send CTR (confirm continue to correct)
>>sie 12 14:42:46.11: [ 4277]: <-- [11:AT+FRM=121\r]
>>sie 12 14:42:47.99: [ 4277]: --> [7:CONNECT]
>>sie 12 14:42:50.55: [ 4277]: RECV recv DCN (disconnect)
> It's too bad the sender didn't drop down to V.29 before giving up (DCN)
> because that probably would have recovered things.
> You *may* be able to work around your USR problems by disabling V.17.
> You do that with Class1RMQueryCmd. Search the archives for examples.
I put the following lines at the and of my config.ttyS0 file:
I have to wait some time to see the results.
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*