HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] how to route the incoming faxes

Ricardo Albuquerque wrote:

Analising the log in /var/log/messages, I noticed that process FaxGetty are not sending the parameters "CIDNumber" and "CIDName". See the last line from the log below, the 3 last parameters are empty.
Aug 26 15:04:06 oraserver FaxGetty[5133]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyS1'
Aug 26 15:04:34 oraserver FaxGetty[6820]: RECV FAX (000000050): from 8532669797, page 1 in 0:26, INF, 3.85 line/mm, 1-D MH, 9600 bit/s
Aug 26 15:04:34 oraserver FaxGetty[6821]: RECV FAX (000000050): recvq/fax000000007.tif from 8532669797, route to <unspecified>, 1 pages in 0:28
Aug 26 15:04:37 oraserver FaxGetty[5133]: RECV FAX: bin/faxrcvd "recvq/fax000000007.tif" "ttyS1" "000000050" "" "" ""
I realy need help. Thanks in advance

Read 'man hylafax-config'. Pay particular attention to the part that discusses "CIDName" and "CIDNumber". Then make sure that both your line and your modem support Caller ID, and then make sure that you've got Caller ID support enabled in the modem, possibly by adding the needed command to ModemResetCmds.


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*

Project hosted by iFAX Solutions