HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Hayes Accura and caller ID

Hi Michael,

Please reply to the list so that everyone can contribute and benefit from
your experience.

The V.90 commands will be a superset of those found on your earlier modems.
Try sending both the Agere and Conexant commands to see whether you can work
out which chipset you have.  ATi commands 0 to 11 will probably tell you a
lot and might help us make some suggestions.

Zoom are probably the only people who can tell you whether this modem has
the hardware to support NZ Caller ID.


Mainpine Limited - Support
USA +1 503 822 9944 | Asia/Europe +44 1225 869439  
andrew.rinaldi@xxxxxxxxxxxx | www.mainpine.com

-----Original Message-----
From: Michael Hallager [mailto:michael@xxxxxxxxxxxxxxxxxx] 
Sent: 02 July 2007 11:13
To: andrew.rinaldi@xxxxxxxxxxxx
Subject: Re: [hylafax-users] Hayes Accura and caller ID

Except it is not a v90 modem. I have the AT command set guide here for the
versions and not all commands work.

> Here's a link to the Accura documentation;
> http://www.hayesmicro.com/techsupport/accura232.htm
> Your product serial number will tell you whether this is an Agere or
> based modem.
> If you have no luck finding what you need then I'd suggest that you
> Zoom support.... I'm pretty certain however, that the documentation won't
> tell you whether this model will support NZ Caller ID.

Michael Hallager
net trust ltd
www.networkstuff.co.nz p.09 839-1000

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*

Project hosted by iFAX Solutions