HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Call ID pattern not matching?

/usr/local/sbin/faxinfo fax000001285.tif returned the result:
    Sender: CME Resource
     Pages: 1
   Quality: Normal
      Page: North American Letter
  Received: 2007:10:05 11:38:23
TimeToRecv: 0:05
SignalRate: 26400 bit/s
DataFormat: 2-D MMR
ErrCorrect: Yes

/usr/bin/tiffinfo fax000001285.tif returned the result:
TIFF Directory at offset 0xb5c (2908)
  Subfile Type: multi-page document (2 = 0x2)
  Image Width: 1728 Image Length: 1078
  Resolution: 204, 98 pixels/inch
  Bits/Sample: 1
  Compression Scheme: CCITT Group 4
  Photometric Interpretation: min-is-white
  FillOrder: lsb-to-msb
  Orientation: row 0 top, col 0 lhs
  Samples/Pixel: 1
  Rows/Strip: (infinite)
  Planar Configuration: single image plane
  ImageDescription: MyCompany
  Model: Mainpine Venus V.92 I03.04.02 (0026SD) Voice V2 V92cap 12ns RAM Mercury
  Software: HylaFAX (tm) Version 5.1.8
  DateTime: 2007:10:05 11:38:23
  HostComputer: faxserver.mycompany.com
  Group 4 Options: (0 = 0x0)
  Fax Receive Parameters: 0021e050
  Fax Receive Time: 5 secs
  Fax DCS: 00 40 1F 22

FAXNumber:    1.222.333.4444
DialStringRules:    etc/dialrules
ServerTracing:        1
SessionTracing:        0xFFF
RecvFileMode:        0644
LogFileMode:        0644
DeviceMode:        0666
RingsBeforeAnswer:    1
SpeakerVolume:    off
GettyArgs:        "-h %l dx_%s"
LocalIdentifier:    "MyCompany"
TagLineFont:        etc/lutRS18.pcf
TagLineFormat:    "From %%l|%c|Page %%P of %%T"
FaxRcvdCmd:        bin/faxrcvd.custom
ModemDialCmd:    ATDT8%s
ModemType:        Class1.0        # use this to supply a hint
ModemRate:    57600
Class1Cmd:     AT+FCLASS=1.0   # command to enter class 1.0
Class1EnableV34Cmd:  AT+F34=14,1,2  # 33600-2440 primary, 2400-1200 control
ModemFlowControl:    rtscts        # many firmwares have broken software flow control
ModemSetupDTRCmd:    AT&D3        # hang up and reset on DTR drop
Class1TMConnectDelay:    400        # counteract quick CONNECT response
Class1HasRHConnectBug:    yes        # cope with +FRH=3 CONNECT errors
# If your line supports Caller-ID, you may want to uncomment this...
ModemResetCmds:    AT+VCID=1
CallIDPattern:    "NMBR="
CallIDPattern:    "NAME="
JobReqBusy:    360
JobReqNoAnswer:    360
JobReqNoCarrier:    360

> Date: Mon, 8 Oct 2007 11:30:34 -0700
> From: faxguy@xxxxxxxxxxxxxxxx
> To: ronald_lew@xxxxxxxxxxx
> CC: hylafax-users@xxxxxxxxxxx
> Subject: Re: [hylafax-users] Call ID pattern not matching?
> Ronald Lew wrote:
> > I have a faxrcvd.custom which uses CIDNUMBER and/or CIDNAME. One
> > thing I noticed is that the faxinfo script does not have the CallID1
> > and CallID2 parameters. The best relevant parameter is the sender but
> > I want more than that.
> Receive a fax with your current configuration. Then run both faxinfo
> and tiffinfo against the corresponding TIFF file in
> /var/spool/hylafax/etc/recvq and show me the output.
> Please also attach your modem configuration file.
> Thanks,
> Lee.
> ____________________ HylaFAX(tm) Users Mailing List _______________________
> To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
> On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
> *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*

Help yourself to FREE treats served up daily at the Messenger Café. Stop by today!

Project hosted by iFAX Solutions