HylaFAX The world's
most advanced open source fax server
Re: [hylafax-users] asterisk + iaxmodem + hylafax
gibbe gabba wrote:
hylafax doesnt seem to detect a carrier signal.
Your log shows that *iaxmodem* didn't detect a carrier signal. (Carrier
detection is done largely on the modem-side.) So this is probably an
issue with the call audio itself or (less-likely) with iaxmodem. There
is an extremely remote chance that it is a HylaFAX issue.
So my recommendation would be to...
1) take a look at your zttest results. Run zttest... let it run for a
minute. If you get anything less than 99.98% then there is probably a
hardware configuration problem that you need to address to allow the zap
device more interrupt resources (e.g. move the card to a different slot).
2) make an audio recording and send it to me (read the README file found
in the iaxmodem source code on how to do this... or
And in the remote chance that it is a HylaFAX issue...
3) you could upgrade to HylaFAX+ 5.1.9 (http://hylafax.sourceforge.net)
which handles this kind of situation you show in the logs slightly
different, and may cause for a different outcome.
Based on my experience, chances are that the problem is that you're
either using VoIP for faxing (uh-oh) or your zap card is misconfigured
and the zttest results will show it.
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*