HylaFAX The world's
most advanced open source fax server
Re: [hylafax-users] HDLC frame not byte-oriented
On Dec 19, 2007 6:15 PM, Andrew Rinaldi <andrew.rinaldi@xxxxxxxxxxxx> wrote:
> Hi George,
> No, but even if we fix this problem then we will just move onto others
> because it's a USR modem.... that's why I gave the 'simple' answer....
> obviously, other people are free to debug the logs and give the 'complex'
> answer... personally, given Nicola is using a recent HylaFAX version then I
> really don't think it's worth the time debugging USR problems once again.
> If you are any doubt about the problems that exist for many USR users then
> search the Hylafax or Microsoft SBS archives.
OK , I use USR modems for several months. I replaced them with multitech modems.
I saw no difference, but it's good you can give such 'simple' answers.
> Andrew Rinaldi
> Mainpine Developer Support
> USA +1 503 822 9944 | UK +44 8458 909438
> andrew.rinaldi@xxxxxxxxxxxx | www.mainpine.com
> -----Original Message-----
> From: hylafax-users-bounce@xxxxxxxxxxx
> [mailto:hylafax-users-bounce@xxxxxxxxxxx] On Behalf Of George H
> Sent: 19 December 2007 15:59
> To: hylafax-users@xxxxxxxxxxx
> Subject: Re: [hylafax-users] HDLC frame not byte-oriented
> On Dec 19, 2007 5:35 PM, Andrew Rinaldi <andrew.rinaldi@xxxxxxxxxxxx> wrote:
> > Hi Nicola,
> > The simple answer is get yourself a decent modem - something with a
> > Agere Venus chipset is a good start... however, if this is an
> > important installation then you might want to consider a fax board;
> > http://www.mainpine.com/products_IQE.php
> So you are 100% certain that the problems he is getting (as specified in his
> error log attached) is being produced by his US Robotics modem ?
> > Regards
> > Andrew Rinaldi
> > Mainpine Developer Support
> > USA +1 503 822 9944 | UK +44 8458 909438 andrew.rinaldi@xxxxxxxxxxxx |
> > www.mainpine.com <http://www.mainpine.com/>
> > _____
> > From: hylafax-users-bounce@xxxxxxxxxxx
> > [mailto:hylafax-users-bounce@xxxxxxxxxxx] On Behalf Of nicola nicola
> > Sent: 19 December 2007 14:57
> > To: hylafax-users@xxxxxxxxxxx
> > Subject: [hylafax-users] HDLC frame not byte-oriented
> > Hi,
> > i have sometimes problems to receive fax...
> > My sistem is:
> > Hylafax server 4.4.3 on SME server 7.3 modem 33.6 SporterVoice
> > USRobotics it was on class 2.0 first but i know that sometimes i have
> > problem to receive so i put it in class 1, but i have problem again!!!
> > Attachment you can see error logs (there are many from the same
> > sender), my modem config, i have to change it?
> > Thanks.
> > Nicola.
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*