HylaFAX The world's
most advanced open source fax server
Re: [hylafax-users] Missing EOL after 5 seconds (section 3.2/T.4)
Steve Underwood wrote:
hi all!5s is the time in very old versions of T.4. It should be 13s, 19s, or
37s these days, depending on the resolution.
i use hylafax 4.3.0 on a gentoo box with a MODEM U.S. ROBOTICS 56K
FAX connected to ttyS0 for a while. recently i encountered this
message while receiving faxes:
Missing EOL after 5 seconds (section 3.2/T.4)
In this case I suspect that the error message is misleading.
HylaFAX isn't ever enforcing a 5-second timeout between EOLs. The modem
may be, but in this case it wasn't. In this case it was just the error
message that happened to be assigned to this kind of situation... where
the modem stopped communicating back with the host in Phase C.
HylaFAX only uses this error message in two cases 1) if the modem itself
gives the +FHS:91 condition - which is rare, or 2) if data reading from
the modem ceases entirely during Phase C. In the latter case (which is
the case at hand) the error message is a bit misleading.
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*