HylaFAX The world's
most advanced open source fax server
[hylafax-users] Eicon board modem speeds
My question is about modem speeds with the Eicon fax board.
hylafax-4.4.4-1rhel5 binary install
Eicon 30 channel diva server board
The modem configuration:
# $Id: eicon-2,v 1.2 2004/03/05 02:29:32 lhoward Exp $
# prototype config file for the Eicon Diva ISDN Modem
GettyArgs: "-b -r -s %s %l"
LocalIdentifier: "ooba(pty)ltd HylaFax"
TagLineFormat: "From %%l|%c|Page %%P of %%T"
ModemRate: 57600 # on boards supporting V.34-fax,
# this may need to be 57600
Class2ECMType: 2.0 # follows Class 2.0 spec, not Class 2
#Bind Modem to Controller 1
# Put the Destination Address in CIDNumber. We can the reject calls on the basis
# Of where we are sending them, instead of the Caller ID
CIDNumber: "DAD: "
CIDName: "CID: "
QualifyCID: etc/cid # CID access control list file
Using the testfax utility that is installed with the Dialogic drivers we are able to send and receive fax at speeds of 33600 but when using HylaFAX the max send speed we have been able to achieve is 14400.
Looking through the comm logs the best HylaFAX ever offers is 14400.
Any help would be greatly appreciated as resolving this problem would significantly reduce our fax costs.