Section: Maintenance Commands (8C)
Updated: March 3, 1995
Return to Main Contents
faxabort - tell a HylaFAX server to abort a receive
sends a message to a HylaFAX
telling it to abort any active receive operation.
can either be the name (typically the
last component of the terminal port the
modem is attached to), or the full name
of the associated
named pipe file, e.g. ``FIFO.ttym2''.
Note that to abort a send operation the
command must be used.
- -q dir
Use a spooling area other than
On some systems it is not possible to abort a received facsimile
because of problems in the operating system; on such systems the
message sent by
will be (silently) ignored.
/var/spool/hylafax default spooling area
/var/spool/hylafax/FIFO fifo for contacting faxq
for a complete discussion of the structure and
content of the spooling area.
- SEE ALSO
This document was created by
using the manual pages.
Time: 09:07:25 GMT, June 23, 2001